Pad-Lok is a padded control surface lock. Locks flaps, ailerons, elevators, and rudder quickly, simply and safely. Pads compress to surface configuration and won't damage finish or absorb water. Units are 4.25" diameter and weigh 10oz. CATALOG # 113 $16.95 ea. - 2 or more $15.50 ea. |
 |
A super-strong and foolproof tie down. Simple to use no knots or tools necessary. Holding action of a unique braid-lock is automatic and completely secure even when the line is slack. Releases easily and quickly, but will not release itself. Plated scissor hooks attach securely to anchors and aircraft. polypropylene rope is unaffected by oil, fuel or water. Length adjusts from 40 in. to 100 in. yet weighs only 19 oz. Portable enough to take along. CATALOG # 116 $19.50 ea. - 2 or more $17.50 ea. |
 |
A small calibrated windsock for accurate wind speed and direction information. The orange windsock measures 6.5" dia. x 27" long. Sock is mounted on a specially designed internal frame, which keeps the mouth open at all times. The windsock provides information in breezes as light as 2 mph, and is fully extended at 15 mph. Included chrome plated steel mast, adjustable in length from 33" to a full 4.5 ft. This windsock is not a toy, but an honest-to-goodness windsock ! Ideal for heliports, hangers and private airstrips. CATALOG # 117 $49.95 ea. Replacement windsock for our WINSOCK-IT Kit. Measures 6.5 in. dia. x 27" long. Same MILSPEC fabric and coloring as our 8' Airport Windsock CATALOG # 118 $19.95 ea. |
 |
This precision windsock frame uses stainless steel ball bearings, which allow the sock to turn a full 360 degrees in the slightest wind. The all-Aluminum frame is adjustable for other socks that vary slightly in size. Easily mounts on 1 ½ in. pipe using a 1 ½ in x ¾ in. reducer (not included). Catalog # 124 $79.95 |
 |
Airport style windsock measures 8 Ft x 1.5 Ft. Made of vinyl coated nylon, brilliant orange in color. This MlILSPEC fabric IS approved by the Port of New York Authority for JFK. All seams are double stitched to last. CATALOG #125 $44.95 ea. |
 |
Collapsible mini chocks made of anodized aluminum. Can be used on hard or dirt surfaces. When collapsed measure 3.75" long x 2" wide x .5" high. Each pair weighs only 14oz! and has a 14.'lanyard. One pair needed for each wheel. CATALOG # 127 $15.95 a pair. |
 |
|
This streamer is red nylon measuring 3 in x 14 in. Lettering is done in white, utilizes same grommet and trifold as our "REMOVE BEFORE FLIGHT" streamers. CATALOG # 130 $5.95 ea. |
 |
This engine intake cover is designed to protect and cover air intake openings on practically all general aviation aircraft including singles, twins and home-builts. It affords protection against nesting birds, snow, dust and blowing debris. The cover will accommodate different angles, curves and sizes of engine cowls and air intake configurations by a simple Velcro adjustment. Fits aircraft that were, until now unable to be fitted with the older and outdated types of protection. Constructed of a lightweight fire retardant mesh material-approved by California State Fire Marshal. Material allows immediate covering following engine shutdown-will not melt or blister like older plugs. Complete with installation hardware and two "Remove Before Starting" engine streamers. CATALOG # 131 $43.95 ea., 2 or more $39.95 |
 |
The "Bib" attaches to the engine intake cover and allows you to cover additional intakes-providing even more protection. Made of same material as Intake Cover and easily attaches with Velcro strip and additional stud (hardware included). CATALOG # 132 $21.95 ea. |
 |
Florescent orange 3" wide x 23" long streamer with bold black lettering. Large brass grommet is secured to fabric using a unique triangular fold. Grommet adheres to four layers of fabric, significantly increasing tear resistance. Made of heavy-duty 10oz. vinyl coated nylon for years of' service. CATALOG # 135 $5.95 ea. |
 |
Designed to fit 3/4" cylindrical shaped pitot tubes. Attention getting "REMOVE BEFORE FLIGHT" streamer attached. Fits snugly for maximum protection , a small concealed hole prevents the pitot/static system from pressurizing during use and makes them easy to attach and remove. For Cessna aircraft CATALOG # 137 $12.50 ea. |
 |
|
Designed specifically to fit the blade style pitot tubes commonly found on Piper aircraft. Concealed hole prevents pitot/static system from pressurizing during use. The fluorescent orange "RE MOVE BEFORE FLIGHT" streamer is 23 in. long. CATALOG # 138 $12.50 ea. |
 |
|
KURV II Wheel Cover
The KUVR **IT II WHEEL COVER is designed to cover that precious investment, "your tires", on your airplane. The fabric is a vinyl-coated polyester that is fade resistant and California State Fire Marshall approved (#F-2310). The weave breathes and yet provides 85% shade factor from the suns damaging ultra violet rays. It is easy to care for. Simply machine wash and just hang it to dry . The KUVR **IT II WHEEL COVER is easy to use. Simply place the cover over your tires and adjust the strap to the desired tightness and lock into place. There are three sizes for your convenience: Small fits tire size: 5.00 – 5/15 x 00-6 - Catalog# 139 $18.00 ea. Medium fits tire size: 6.00 - 6/7.00-6 - Catalog # 140 $21.00 ea. Large fits tire size: 6.50 - 8/8.50-10 - Catalog # 141 $24.00 ea. **REMEMBER** REMOVE BEFORE STARTING ENGINE** |
 |